Safety Instructions
Section 2
Introduction
Page 9
ISOBOX® Mobil
91338723_A0
Basic
2
Safety Instructions
2.1
Introduction
The section on safety instructions describes the risks associated with the appliance in terms of product liabil-
ity (according to the EU Directives).
The safety instructions are meant to warn of hazards and help to avoid damage to persons, the environment
and property. Please make sure that you have read and understood all the safety instructions given in this
section.
The valid national and international Safety at Work Regulations must be complied with. The manufacturer is
responsible for the valid regulations he/she has to provide. He/she must acquaint himself/herself and the op-
erator with the new regulations.
In addition to these operating instructions, comply with the Health and Safety rules of the German Federation
of the Statutory Accident Insurance Institutions for the Industrial Sector, especially with those that concern
the handling of hot items and risks involved (BGR 110 "Protection of health and safety at work in restaurants"
and BGR 111 "Protection of health and safety at work in large-scale kitchens").
2.2
Warning Symbols Used
Symbols are used in these operating instructions to indicate the dangers that may occur while operating or
cleaning the appliance. In both cases, the symbol provides information on the type and circumstances of
hazards.
The following symbols may be used:
General hazard area
2.3
Safety Instructions for Appliance Safety
The appliance is operated safely if it is used correctly and carefully. Negligent handling of the appliance can
lead to a threat to life and physical well-being for the user and / or third parties as well as hazards for the ap-
pliance itself and the operator's other property.
The following points are to be observed to ensure the appliance safety:
§
The appliance may only be operated as intended, when it is in perfect condition with regards to tech-
nical standards, with awareness of safety and hazards and in accordance with the operating instruc-
tions.
§
All operating and actuating elements must be in a perfect and fail-safe condition with regards to tech-
nical standards.
§
Before putting the appliance into operation, the appliance must be checked for external visible dam-
age and defects. In case of damage, immediately inform the competent bodies and switch off the ap-
pliance.
§
Modifications or retrofits to the equipment are only permitted after consultation with the manufacturer
and upon receipt of their consent in writing.
§
The appliances can only be operated under continuous supervision.
§
Move the appliance only with the doors closed. Unless the doors are properly closed, they may open
during transport and cause damage or lead to injuries.
§
Release both total locks before moving the appliance. Moving the appliance when the total locks are
engaged can damage the chassis.
§
The appliance may only be transported over level floors. Moving the appliance over very uneven
floors and stair steps can damage the chassis.
