Section 6
Troubleshooting and Repair
Page 18
Instructions regarding Fault Repair
ISOBOX® Mobil
Basic
91338723_A0
6
Troubleshooting and Repair
6.1
Instructions regarding Fault Repair
Please contact our service partners in the event of a malfunction or complaints within the warranty period.
Even after the warranty period is expired you can have necessary repair work done by our service partners
and certified electricians.
Servicing may be carried out by authorised specialists only.
Defective components should only be replaced with
HUPFER
®
original parts. The modular design simplifies
the replacement of individual components.
Always specify the information and corresponding part number indicated on the rating plate when contacting
the after-sales service or ordering spare parts.
Regular inspection and maintenance of the appliance prevent disruptions to operations and ensure safety.
6.2
Fault and Action Table
Fault
Possible cause
Remedy
Running noise of swivel casters
Defective caster bearings
Replace the swivel casters.
Sticky surface of the casters
Clean the swivel casters.
The appliance pulls to the right or to
the left when transporting
Damaged caster bearings
Replace defective casters with new
ones.
Rolling resistance of the casters is
higher than when putting the appli-
ance into operation
Damaged caster bearings
Replace defective casters with new
ones.
Total locks no longer lock
Wear on the locking brake
Replace the locking brake or replace
defective casters with new ones.
