Transport, Initial Operation and Taking out of Service
Section 4
Transport
Page 15
ISOBOX® Mobil
91338723_A0
Basic
4
Transport, Initial Operation and Taking out of Service
4.1
Transport
CAUTION
Damage to appliances caused by improper transport
Appliances should be safely secured when transported off site inside a vehicle
such as a truck. The total locks are not suitable for securing the appliances
when they are transported in a vehicle.
If the appliances are not secured properly, there is a risk of property damage
and personal damage caused by squashing.
Secure each individual separate appliance using suitable transport securing
devices.
The appliance is delivered fully assembled.
When loading, use only hoists and load lifting devices approved for the weight of the appliance. Transport
vehicles which are approved for the weight of the appliance may also be used.
The scope of delivery is specified in the shipping documents in accordance with the valid purchase agree-
ment and included with the delivery item.
4.2
Commissioning
Remove the original packaging and check whether the appliance is complete and undamaged. Do not put a
defective appliance into operation under any circumstances and inform the supplier immediately in such a
case.
Always place the appliance on firm, level floors when unpacking and operating it. Apply the total locks on
both swivel casters to secure the appliance against rolling away.
INFO
Disposal of packing material
The packing consists of recyclable materials and can be disposed of accord-
ingly. The different materials should be separated and disposed of in an envi-
ronmentally friendly manner. The local agencies responsible for disposal must
be contacted regarding removal
The appliance should be thoroughly cleaned with a soft cloth before putting it into operation for the first time.
Ensure that the appliance is clean and dry before putting it into operation. You must always ensure that there
is a minimum gap of 30 cm between the rear of the appliance and the wall, so that hot air can be expelled
when putting the appliance into operation for the first time and during normal operation.
The following appliance functions must be checked before putting it into operation:
§
The total lock function.
