Huntleigh Tx 150, User Manual

Page: 15 / 32

15
Lifting from a bed
•
Roll the patient onto the sling, using the same technique as for a draw
sheet.
•
Manoeuvre the hoist under the bed.
•
Lower the jib sufficiently to secure the sling to the hoist and attach all
straps of the sling to the spreader bar.
•
Lift the patient slightly off the bed and ensure that the sling is not
causing discomfort. If so, return the patient to the bed and reposition
the sling. Once satisfied with the position, begin lifting again.
•
When the patient is sufficiently clear of the bed, pull the hoist away
slowly.
To place a patient on a bed, simply reverse the process:
•
Push the hoist under the bed and ensure that the patient is correctly
aligned over the bed.
•
Gently lower the patient.
•
Make sure that the patient is correctly positioned at all times during
descent.
WARNING
The hoist should not be used on inclines greater than 5°