8
Ignition Air Bar
Remove the ignition air bar by simply lifting it out of the stove.
Baffle
Lift the baffle up (1) and slide it to the left (2) and then lower the right-hand side of it down into the firebox (3) and
remove from the stove.
STOVE ASSEMBLY
Flue Collar
Top or rear flue outlet Place the flue collar gasket on the Wind the four M6 studs supplied
outlet to be used into the fixing holes in the flue
collar until finger tight. Place
the flue collar onto the stove
and tighten using the supplied
washers and nuts from inside
the stove.
