HunterLab MiniScan EZ, Supplemental Manual

Page: 13 / 29

MiniScan EZ Supplemental Manual for EasyMatch QC
13
iv. Option #4: 30-day trial
a. Fill out the registration form provided for the 30-day trial. Connect to the
internet. HunterLab will approve the trial and email the SoftKey license back.
Follow the directions for Option #1 or #2 to complete.
Figure 11. Request 30-day Trial
Add the Sensor
1. Upon initial startup, the following message will be displayed: ‘ Sensor not yet installed .
Please install a sensor to take measurements ’. This message will remain until you
proceed to the Install/ Configure command in the Sensor menu and install a new sensor.
2. The Sensor Manager appears first:
Figure 12. Sensor Manager
3. Select Add Sensor to install a new sensor. The Setup Sensor screen allows selection of
the instrument model and the communications port. Select Next when ready.