HunterLab MiniScan EZ, Supplemental Manual

Page: 6 / 29

MiniScan EZ Supplemental Manual for EasyMatch QC
6
Table 1. MiniScan EZ Versions
Model Geometry Viewing Area
MSEZ-4500L 45°/0° Large
MSEZ-4500S 45°/0° Small
MSEZ-4000L Diffuse/8° (Sphere) Large
MSEZ-4000S Diffuse/8° (Sphere) Small
The MiniScan EZ may be operated using the keypad and display on the instrument itself, and it may
also be operated while connected to a computer running EasyMatch QC. Therefore, having purchased
both a MiniScan EZ and EasyMatch QC, you have two sources of information on the instrument in
addition to this User’s Manual: the MiniScan EZ User’s Guide, which describes stand -alone operation,
and the EasyMatch QC help file, which describes operation of the MiniScan EZ using the software.
Refer to those information sources as required.
MiniScan EZ Accessories
The following accessories are included with the MiniScan EZ system and can be found in the provided
carrying case:
•
Sample port cover - screws on over the sample port to protect the instrument’s optics when
it is not in use.
•
Calibration cylinder - houses the NIST traceable white calibrated tile that is placed at the
sample port during standardization to set the top of the scale, the black glass or light trap
that is placed at the sample port during standardization to set the zero, and the green check
tile that is used to assess long-term instrument performance during the green tile test.
•
Rechargeable batteries - a set of 6 rechargeable AA batteries and a charger (with 110V plug
and 220V adapter) are provided for continuing use of the MiniScan EZ.
•
USB cable for connecting the MiniScan EZ to the computer.
•
Certificate of traceability for the standard white tile.
•
Tile data sheet - provides NIST-traceable calibrated values for the standard white tile and
values read at factory for the green tile.
•
MiniScan EZ User’s Guide .
•
Utility program .