HunterLab Aeros EasyMatch QC, Supplemental Manual

Page: 7 / 31

Aeros Supplemental Manual for EasyMatch QC ver. 2.0
7
Figure 2. Calibration Box
Power Jack
The instrument is supplied with a 24 VDC (3.75A) power supply. The power supply is plugged into the
back of the instrument as shown along with the Ethernet port and the USB port.
Figure 3. Rear View with Connectors
CAUTION
Note: Use only the power cord included with this instrument or a replacement
obtained from HunterLab. Be certain that the power cord is in good condition
before connecting it.
Power Switch
To turn the instrument on, press the rocker switch on the back of the instrument.
Front and Rear USB Connectors
There are two USB connectors on the Aeros. The one in the front is typically used for exporting jobs
and workspaces, backing up the instrument and updating software. The USB port on the back of the
instrument is typically used to connect a printer or a keyboard to the Aeros
.
Power
Power
Supply
Connection