background image

CHILD SAFETY

17

 

Young children can STRANGLE in cord loops. They can also wrap cords around 
their necks and STRANGLE.

 

Always keep cords out of the reach of children. 

 

Move cribs, playpens and other furniture away from cords. Children can climb 
furniture to get to cords.

Cord Loop Shades

 

Attach the cord tensioner on the cord loop to the wall or window 
casement. This can prevent children from pulling cord loops  
around their necks. See “Attach The Universal Cord Tensioner 
(UCT)” on page 10. 

 

Hunter Douglas provides a cord tensioner installation kit with 
instructions for attaching the cord tensioner. For the shade to 
operate properly, the cord tensioner must be correctly mounted 
and secured.

 

Fasteners provided in this kit may not be appropriate for all 
mounting surfaces. Use appropriate anchors for mounting 
surface conditions. 

 

Only Hunter Douglas supplied cord tensioners and hardware should be used. 
Replacement parts may be obtained by contacting the Hunter Douglas  
Customer Information Center at 1-888-501-8364.

For more safety information call 1-888-501-8364 
in the U.S. or 1-866-662-0666 in Canada. 

WARNING

note:

  The warning labels on the bottom rails of corded window coverings contain 

important safety information. These warning labels are designed to be permanent, in 
accordance with the industry’s safety standards, and must not be removed.

Summary of Contents for Provenance Woven Wood Shades




















Reviews: