2. Pairing a remote to the blind
A PowerView® remote can control up to 6 individual groups of blinds (buttons 1 to 6 at the top of the remote).
The instructions below assign a blind to group 1.
1.2.1
Press and hold
the
manual control button
on
the motor for
12 seconds
.
The blind will jog 1x at 6 seconds
and a second time at 12 seconds
1.2.2
Release
the
manual control button
after the
second jog.
The Network ID and Group assignments have
been cleared.
This instruction will make use of these buttons on the
remote:
Page 2 of 18
version: 1.0
