Test signal to Repeater(s).
Press and hold the P button on the back of the PowerView® Hub. The
light on each Repeater should blink BLUE. If the Repeater does not blink
BLUE, move the Repeater closer to the Hub or pair the Repeater to the
correct PowerView® Shade Network.
Other controls on the back of the Hub include the R button which
power cycles the Hub and erases all Hub data when pressed and held
for 6 seconds.
Transfer your hub data (if needed).
If you have a Gen 1 Hub (above left) on your PowerView® Shade
Network, follow in app instructions to transfer Hub data to the new
PowerView® Hub.
9
