Note:
During the boot-
up process, the Hub’s LED will display different behavior to
visually communicate its status. Please refer to the PowerView® LED Feedback chart on
page 14 of this guide for reference on different LED behavior. Do not interrupt the Hub
boot-up process until the Hub is ready to connect to a home network or join a
PowerView Shade Network.
Connect Hub to Internet connected wireless router.
Connect using an active WiFi network:
Wait for the Hub LED to turn solid MAGENTA. This indicates the Hub is
ready to connect to a WiFi network. Open the PowerView® App on your
mobile device and follow the on-screen instructions to properly connect
to an active WiFi network. Once connected to a WiFi network, the Hub
will install a firmware update and reboot. The Hub will blink AMBER
when it is ready to join a PowerView Shade Network.
Connect using an Ethernet cable (optional)
Connect the Ethernet cable from the Hub to an open LAN port on your router. The
Hub will install a firmware update and reboot. The Hub will blink AMBER when it is
ready to join a PowerView Shade Network.
Note:
If connecting the Hub to the home network via Ethernet, connect the
Hub to the router, before connecting the Hub to power.
Connect power to Hub.
1. Connect one end of the USB power cable to the USB power supply.
2. Plug the USB power supply into an AC outlet or power strip.
3. Plug the other end of the USB power cable into the power port on the
back of the Hub.
5
