8
Intermediate Stops
This section includes information on intermediate stops for
PowerRise
®
and PowerGlide
®
products. The PowerTilt
™
system
for horizontal blinds does not offer the intermediate stop feature.
Setting Intermediate Stops
An intermediate stop allows a window covering to be preset so
that it will stop at the same “intermediate” position each time it is
opened or closed. This is useful to consistently align the opening
height of multiple window coverings, as well as to align the
opening height to a mullion or other architectural feature.
1. Remove the wall switch from
its mounting place.
2. Open and close the window
covering fully, then adjust it
to the desired position.
3. Press and hold the ALL button
for 6 seconds. (The ALL button
starts flashing green.)
4. Point the top of the switch
at the sensor eye and press
the UP button to set the
intermediate stop. The window
covering moves slightly (or
“jogs”) to indicate that the
stop has been added.
5. Press the ALL button to save
the stop; the button stops
flashing.
6. Return the wall switch to its mounting place.
Note:
One intermediate stop can be set for each window
covering. If you set a new intermediate stop, it replaces the
previous stop.
Note:
Reset the window covering to clear the intermediate
stop. See “Resetting a Window Covering” on page 20.
5
3
2
4
