HunterDouglas Nantucket Installation And Operation Manual Download Page 17 | Manualshive

Page: 17 / 32

background image

INSTALLATION

15

If You Have a DC Power Supply with Daisy-Chain Connections...

The daisy-chain feature allows up to three PowerView

™

shadings to be powered by a single DC

power supply. However, each shading can operate independently. The daisy-chain feature is only
available with the DC power supply option.

■

Route the power cables from each shading to the connector, using an extension cable, if
necessary.

■

Plug an extension cable into the connector and plug the cable into the DC power supply. Two
extension cables and two connectors are used for three shadings.

■

Plug the DC power supply into a standard outlet.

Two-On-One Headrail Shadings

■

Route the power cables from each side of the shading to the connector. Use extension
cables, if necessary.

■

Plug the extension cables or power cables into the connector and plug the cable into the DC
power supply.

Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” on page 16

or “Testing the Shading” on page 17.

Power Cable

from Shading

Power Cable

from Shading

Extension Cable

Connector

DC Power Supply

«
...
15
16
17
18
19
...
»

Summary of Contents for Nantucket

































Reviews:

No comments

Related manuals for Nantucket

Brand: OFM Pages: 3

Brand: Office Star Products Pages: 2

Brand: Neo Chair Pages: 3

Brand: Ickle Bubba Pages: 8

Brand: Backyard Discovery Pages: 37

Brand: Okamura Pages: 2

0-65857-17353-6

Brand: Dorel Living Pages: 20

Brand: Furniture of America Pages: 7

Brand: Furniture of America Pages: 12

Brand: Furniture of America Pages: 7

Brand: VECELO Pages: 2

Kuga Corner Rack

Brand: Woood Pages: 3

BEACON PARK 6 PIECE DINING SET CAPTAIN CHAIR...

Brand: HAMPTON BAY Pages: 11

Brand: TRADINGZONE Pages: 12

Brand: Romina Pages: 6

Brand: Samuel Lawrence Pages: 3

Randell AMH6609

Brand: Safavieh Furniture Pages: 2

MCGRAW-EDISON 1184

Brand: Cooper Lighting Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands