INSTALLATION
21
■
Fascia Blockout Shades.
Abut the side channel to the
bottom of the fascia assembly. The side channel should
be flush with the back of the fascia.
■
Ensure the channels are plumb by checking with a
level. Mark the mounting holes for the side channel to
determine where to drill the holes.
■
Measure the side-to-side distance between them. The
distance between the top two holes and between the
bottom two holes should be equal.
■
Drill the screw holes using a
3
∕
32
" drill bit approximately
3
∕
8
" deep.
■
Use the screws provided to attach the side channels to the mounting
surface.
Fascia Blockout
Side
Channel
Fascia
