INSTALLATION
16
Install the Shade and Additional Components
Refer to the appropriate section based on your shade order.
Install the Cassette
■
Angle the cassette back and then bring the
cassette forward to catch the front lip of the
bracket.
■
Push the cassette back to snap it into the lower lip
on the bracket.
ST30 Motor Shade
IMPORTANT:
Do not remove the paper banding used to
prevent shade from unrolling prematurely until after the shade is
installed.
Install Clutch End
■
Hold the shade with the motor Reset and Manual Operation
switches facing the floor, and the power cord close to
the wall.
CAUTION:
Do not cut the antenna wire or wrap it around
the power cord.
■
Install the motor end of the shade onto the tab on the motor-
side bracket.
Install Idler End
■
Push in the spring idler to compress.
■
Slide the idler onto the bracket and slide to
the center hole. Idler will expand and will
engage the bracket to secure the shade into
the bracket.
Bracket
Front
Lip
Cassette
Tab
Motor
PROG
RADIO
SET MAN
somfy
Reset
Manual
Operation
Motor
Insert
Tab
Here
Antenna
Wire
Idler
Push in
to compress.
Idler
Compressed
Slide Idler until
Seated in Center Hole.
