4
5
EN
Charging the Panel
1. Charge panel by sunlight: Place the panel tilted slightly upwards to face
the sun. The solar charge indicator (Green LED) is on when the panel is
generating power from sunlight.
2. Charge panel by DC input: Plug the Power adapter or the USB cable into
the 5V Input Port [2]. When using the USB cable, ensure that the power
supply source is 5V/2A. The red battery status LED [7] indicates the
charging status.
Charging Status
LED 1
LED 2
LED 3
LED 4
0% – 24%
Flashing
OFF
OFF
OFF
25% – 49%
ON
Flashing
OFF
OFF
50% – 74%
ON
ON
Flashing
OFF
75% – 99%
ON
ON
ON
Flashing
100%
ON ON ON ON
Power supply the Camera
Select the output cable that fits your camera model.
Plug in the output cable to the output on the solar panel that corresponds
to the required voltage of your camera (OUT 12V [1], OUT 9V [4], OUT 6V
[3]).
Press the battery status button [5] to check the battery level.
Power Status
LED 1
LED 2
LED 3
LED 4
<25%
ON OFF OFF OFF
25% – 49%
ON
ON
OFF
OFF
50% – 74%
ON
ON
ON
OFF
75% – 100%
ON
ON
ON
ON
Notice
1. Do not drop, disassemble or puncture the panel; do not expose to fire, high tempera-
ture, low temperature or submerge in water
2. If you find that the product is bulging or has other anomalies, stop using the product
immediately.
WARNING: Failure to follow these safety instructions may result in fire, electric shock,
damage, or other injury.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order to
prevent any harm to the environment or health hazards caused by incorrect
waste disposal, the product must be handed in for recycling so that the
material can be disposed of in a responsible manner. When recycling your
product, take it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed of in an environ-
mentally sound manner.