13
You have the ability to adjust the amount of time that
a station will run once it has been turned on by your
ROAM System. This does not affect the run time
programmed into your controller. There are 10 preset
run times from 1 minute to 90 minutes.
To change the Remote Activated Station Run Time
follow the steps below:
1. If the unit is off (no display), power the
transmitter up by pressing or any of the buttons
for at least 1 second and then releasing the
button. The transmitter will first display the
active station.
2. Press the Mode button
once and the Run
Time icon displayed (default is 2 minutes).
If more than 10 seconds go by without a button
being pressed, the Transmitter will revert back to
displaying the active station.
3. Use the
and
buttons to change the Run
Time to any of the 10 settings ranging from 1
to 90 minutes. Then do not touch any of the
buttons for 10 seconds and the display will
return back to the active station.
CHanGinG THe ReMoTe aCTiVaTed sTaTion Run TiMe ........
Summary of Contents for Residential/Light Commercial Remote Control System
Page 2: ......
Page 6: ...TRANSMITTER RECEIVER SmartPort 2 ROAM COMPONENTS ...
