background image

®

2

3

PGP

®

 Rotor

because it fully retracts to ground level, itʼs 

ideal for both high-traffic and high-visibility 

areas. With cool or warm season grasses, the 

PGP 4" (10 cm) pop-up is the rotor of choice. 

It pops up and waters efficiently and quietly. If 

large shrub beds or slopes are being watered, 

the PGS shrub can be mounted on a riser of 

appropriate height.

Tilted slightly

back from

vertical.

Toe

Sprinklers

installed

vertically.

Vertical.

Perpendicular

to the slope.

10 ft. (3m)

Typical slope installation 

using PGS shrub sprinklers.

Proven, Long-Life Water Lubricated 

Gear Drive

The #1 reliable gear drive system

A rotor needs to rotate – every 

time! First introduced about 

two decades ago and still 

being continuously improved, 

Hunterʼs water lubricated 

gear drive system is #1 in the 

industry, ensuring you with 

reliability and time proven 

optimum performance. The PGP wonʼt stop 

rotating when itʼs supposed to be turning.

Advanced Wiper Seal

The most reliable and time proven 

pressure activated riser seal

The PGP includes a heavy-duty wiper seal that 

has been designed for long life under harsh, 

gritty conditions. A special chemical agent is 

incorporated into the rubber to keep microbial 

action from damaging the seal. The surface 

area of the seal, which is in contact with the 

riser shaft, is large enough to stop all flow-by, 

but small enough to keep debris from lodging 

between the seal and the riser shaft. The PGP

®

 

wiper seal can be easily removed for replace-

Blank Nozzle

Quick and easy shut down of 

individual rotors

A blank nozzle is provided on the rack of 

low angle nozzles for those times when the 

installer or end-user has a need to shut off the 

water flow through the nozzle. Easily installed 

as with all PGP

®

 nozzles, this blank nozzle 

eliminates the requirement of removing the 

rotor from the system and capping off the 

elbow or riser. The perfect example of this 

would be where a complete system is installed 

but the project will be landscaped in phases, 

with no need to irrigate the non-landscaped 

sections. Another use for the blank nozzle 

is where sections of turf or planter areas are 

under renovation and no irrigation will be 

required in those areas during the renovation. 

The blank nozzle is just one more feature 

that sets the Hunter PGP rotor apart from 

the competition.

Quick Check™ Arc/Fast Forward

Quick verification of arc stop points

The PGP allows the user to check the right 

and left arc stops without affecting the original 

settings. The ability to manually move the arc 

in a fast forward manner allows the installer 

to set the sprinkler arc more rapidly. While 

this “quick check” is most accurate with water 

flowing, checking while dry will also give 

a very good idea of the arc setting. With the 

riser in the extended position, turn the top of 

the riser back and forth with just oneʼs fingers. 

Where the arc stops will be very close to the 

same point as when the rotor is operating 

under water pressure.

Three Rotor Models...

Turf, shrubs, or slopes

The PGP rotors come in three handy 

models, ready to meet the different 

watering needs in any landscape. 

When higher plant material is 

an issue, the PGH 12" (30 

cm) pop-up offers uninter-

rupted spray while still 

irrigating the shrubs. And 

Summary of Contents for PGP Series





















Reviews: