®
2
3
PGP
®
Rotor
Enhanced Nozzle Efficiency
Performance by design
With a combination of intelligent planning,
carefully controlled manufacturing and
frequent testing that conforms to the strict-
est industry standards, the exceptional per-
formance of our remarkable nozzles is no
accident. Hunter is the only rotary sprinkler
manufacturer that not only tests nozzles during
the development stage but also performs
frequent tests of every batch produced. Hunter
takes the extra step to check our work by
asking the Center for Irrigation Technology in
Fresno, California to independently test our
nozzles to provide third party verification of
their superior results.
Superior Coverage – Across the Range
12 standard and 7 low angle nozzles
With every sprinkler in the PGP
®
rotor
group, twelve standard nozzles (25˚ trajec-
tory) are included on one rack – FREE!
Totally interchangeable and recyclable, these
twelve nozzles provide a system with the
ultimate in versatility for any application.
Only the PGP provides excellent coverage
close to the sprinkler as well as throughout
its full distance of throw. The exceptional
performance of PGP nozzles guarantees
uniform results – with no wet or dry spots in
all head to head spacing installations from
20 feet to 50 feet. Plus, because the nozzles
are readily interchanged and adjusted, the
installer can easily fine tune watering to
meet field conditions. If wind, slopes or
low hanging tree branches are a concern,
or if there is a need to water a smaller area,
request the PGP low-angle nozzles (13˚
trajectory) from your distributor for precise
coverage in these tough conditions.
25˚
13˚
Standard
Nozzle
Low Angle
Nozzle
40˚ to 360˚ Adjustable Arc or Full Circle
Versions
For fastest, hassle-free adjustment, wet or
dry, up or down
The PGP Adjustable Arc Rotor is the all-in-one
sprinkler because of its reversing full circle
and part-circle operation in one unit. With its
40˚ to 360˚ Adjustable Arc, most odd shaped
areas can be irrigated with a quick turn of the
Hunter wrench. The PGP can be adjusted up or
down, wet or dry, for maximum convenience.
Only one rotor is needed to cover those curv-
ing shrub beds and odd-angled hardscapes.
Factory Installed Nozzles
Convenience for large projects
Hunter is always looking for ways to help the
installer be more cost effective. The PGP can
be ordered with factory installed nozzles to
reduce the amount of time needed to install
sprinklers. This convenience on large projects
translates to a lot of time potentially saved on
the job.
Maximum
Arc
Minimum
Arc
40°
360°
PRODUCT FEATURES AND BENEFITS
