41790-01
6
Operation
7
41790-01
Operation
Fig. 4
Fig. 5
Fig. 6
Fig. 7
HANDLE
PULL
FORWARD,
THEN UP
TAB
RECESS
LINE UP TAB WITH
RECESS IN BASE
Fig. 8
OFF
SLEEP
ACTIVE
TURBO
Initial Operation
This section provides basic instructions on the use of your air purifier. After following
these initial directions, please continue reading this booklet to learn how to operate
the more advanced features of your air purifier.
Basic Operation of the Air Purifier:
1. Take the air purifier out of the box and remove the clear plastic protective
bag. Place the unit on a firm level floor.
2. Before turning on the air purifier, you need to confirm that the filters are
firmly in place and have not become loose during shipping. To check the
filters, first open the front grill. Release the front grill by placing your fingers
under the handle on the grill and pull forward, then up. Refer to Figs. 4 and
5.
3. Next, check the cleanable filter by pressing firmly on all four corners of the
filter to ensure that it is fully inserted into the filter opening.
4. The carbon pre-filter is mounted inside the front grill with hook tape. Confirm
that it properly covers the grill vents. You may notice a few black particles
coming off the pre-filter. Those particles are part of the odor-removing
activated carbon and will be collected on the filter during use.
5. Place the front grill back onto the unit. First, line up the tab on the bottom
of the grill with the recess on the purifier base and then push the top of the
grill forward until it is closed. Refer to Figs. 6 and 7. NOTE: This unit will
not operate unless the grill is in the correct position.
6. Plug the unit into a 120V electrical outlet and press the OFF/SPEED key.
The air purifier will start with a low blower speed.
7. Use the OFF/SPEED and TURBO keys to adjust the blower speed to the
desired level (Off, Sleep, Active, Turbo Clean). Refer to Fig. 8.
8. Use the TURBO key to adjust the blower speed to high. After 1
1
⁄
2
hours,
the fan will return to the previous speed setting.
