Hunter PermaLife 30747, Instruction Manual

Page: 12 / 18

41555-011 12
air Purifier Maintenance
FILTER
2. Next, remove the front grill. Place your fingers under the handle on the grill
and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).
3. Gently pull on the cleanable filter to remove it from the unit. While removing
the cleanable filter, note the directional arrows printed on the top of the
filter. The cleanable filter will be reinstalled with the same orientation. Refer
to Fig. 10.
4. The label on the top side of the cleanable filter points to the side that should
be cleaned. Refer to Fig. 10. With a vacuum cleaner and upholstery brush
attachment, clean the cleanable filter until all particles are removed. Do not
use water or liquids to clean the cleanable filter.
5. Install the cleanable filter with arrows pointing towards the unit. Refer to Fig.
10. Press the filter’s frame firmly into the air purifier. To avoid damaging the
cleanable filter media, you should press on the cleanable filter’s frame only.
6. Place the front grill back onto the unit. First, line up the tab on the bottom
of the grill with the recess on the purifier base and then push the top of the
grill forward until it is closed. Refer to Figs. 6 and 7 (pg. 7). NoTE: This unit
will not operate unless the grill is in the correct position.
7. Plug in the unit.
8. To reset the cleanable filter counter, press the CLEaNaBLE FILTER RESET key
for 2 seconds. The cleanable Filter Counter will return to 100% and the Clean-
able Filter indicator will stop flashing.
Fig. 10