HCC - Installing Wi-Fi Antenna
Extension Kit
To improve Wi-Fi visibility to the router, we recommend using the Wi-Fi extension kit (model:
WIFI-
EXT-KIT
). This is not a signal booster, but an option to get the antenna closer to the router. Going
around corners, through obstructions, or just reducing the distance are appropriate applications for
this product.
The extension kit comes with two separate cables and mounting hardware to install in ¾" conduit.
The thicker cable provides a 9' extension, while the thinner cable is 3.5' in length.
WIFI-EXT-KIT: Parts Included
Controller Models
Cable 3.5'
Used only for ACC2
[2]
model controllers. Disregard this
cable when using the HCC model.
Cable 9'
Used for HCC
[3]
and ACC2
[2]
model controllers.
SMA Adapter (red cap)
Used only for HCC
[3]
model controllers.
Conduit Mounting Hardware
Used for HCC
[3]
and ACC2
[2]
model controllers.
Please visit an authorized Hunter distributor near you using our interactive Distributor Lookup
[1]
IMPORTANT:
Use only one cable extension, as combining the two will incur a signal loss.
Steps
Illustrations
Step 1:
Open the front panel to access the antenna
compartment.
Step 2:
Remove the three Phillips screws on the left-hand
side of the back of the panel.
Copyright 2021 Hunter Industries. All Rights Reserved.
11
Summary of Contents for Hydrawise HCC-800-M
Page 1: ......
