44204-01
05/30/2007
problem
probable Cause
solutioN
Noisy operation (continued).
Excessive wobbling.
Note:
When switching from medium to
low speed, you may notice some fan
wobble. When the fan stabilizes at low
speed, wobble will disappear.
4. Using non-approved speed con-
trol.
5. Glass screwed loosely to fixture.
6. Switch housing is loose.
1. Unbalanced blades.
2. Loose blades or blade irons.
3. Fan not secure on hanger assembly.
4. Fan hanger ball not seated in
4. Change to approved speed con-
trol.
5. Hand-tighten the light fixture
screws. Ensure that rubber noise
isolators are installed.
6. Check and tighten screws to the
switch housing mounting plate
and to the upper and lower switch
housing.
1. Use balancing kit included with
fan.
2. Tighten all screws.
3. Turn power off, support fan very
carefully, loosen canopy and hang
correctly.
4. Turn power off, support the fan
very carefully, and check that the
hanger ball is properly seated.
If you have tried these troubleshooting solutions and still have trouble, visit our Web site at http://www.hunterfan.
Summary of Contents for Hunter Ceiling fans
Page 2: ...44204 01 05 30 2007...
