44204-01
5/30/2007
step 2 - asseMblIng tHe Fan
1. Feed the wires and the steel ca-
ble support from the fan through
the canopy and the pipe.
2. Screw pipe into fan assembly until
tight.
IMPORTANT!
Tighten pipe
setscrew as shown in Figure 2.
CautioN
• The pipe adapter has a spe-
cial coating on the threads.
Do not remove this coat-
ing; the coating prevents
the pipe from unscrewing.
Once assembled, do not
remove the pipe.
WarNiNg
• Failure to complete the
steps above properly could
result in the fan falling.
Figure 2 - Assembling The Fan
Pipe Setscrew
Summary of Contents for Hunter Ceiling fans
Page 2: ...44204 01 05 30 2007...
