manualshive.com logo in svg

Hunter Genesis, Programming And Operations Manual, Page: 8 / 43

Share
Download
Hunter Genesis Programming And Operations Manual Download Page 8

GENESIS OPERATIONS MANUAL 

  

6 

Begin an automatic Program/start at a particular station and run the balance of that Program 
automatically.  When a Program is running in semi-auto mode and you press this key again, it 
advances to the next station in that Start.   

Set and start from one to six stations in a temporary manual Program.  In the manual Program, the 
system prompts you to select stations, and then set separate Run Times for each (hrs:min or 
min:secs).  The stations can run either sequentially or simultaneously.     

When you activate the manual Program, it interrupts all other operations.  When the manual Program is finished, 
the other operations resume at the point where the interruption occurred.   

Stops all stations that are running, including those in manual operation, or engage the Rain Shutdown 
feature.     

Note: If you select a Program or a Program/Start before pressing OFF, only that Program will stop.  The Program 
that stopped will resume when the next scheduled start occurs.   

Choose numbers for Programs, Starts, Run Times, and all numerical entries.     

Clear the last entry in the display.  You can also press this key to clear error messages from the 
display.  

Saves Program or Program changes into memory, and deletes all previous entries in that position. 
You must also press this key to activate Manual or Semi-Auto operation.  

Use to select AM or PM when setting time of day (press repeatedly to change back and forth 
between AM and PM).  During option programming and manual programming, use this key to 
toggle between selections any time a question mark (?) appears in the display.   

If you press OPTIONS while the time of day is showing, the display window shows various  global 
options, which are options affecting the entire controller. Continue pressing the Options button to 
cycle through all the option choices. Press ENTER to choose an option to set.    

If you press OPTIONS after you've selected a Program, you can view different sets of options related to Programs. 
Press the OPTIONS key once to get to the option prompt.  Select options by number, or press the OPTIONS key 
repeatedly to advance through the options.  Press ENTER to choose an option to set.   

For more complete information on options, see these sections: How To Use the Program/Start Options and 
How to Use the Program Options.  

Summary of Contents for Genesis












































Reviews:

No comments