10
®
41343-01 7/1/2002
STEP 3 - ASSEMBLING THE FAN
Use the Step 3 instructions for the
type of mounting you have selected:
standard, angle, or flush.
STANDARD AND ANGLE MOUNTING
For Standard 8-foot Ceilings and
Higher
1. Insert the pipe through the
canopy as shown in Figure 3a.
Feed wires from the fan through
the pipe.
2. Screw pipe into fan assembly un-
til tight.
IMPORTANT!
Tighten
pipe setscrew as shown in Figure
3a.
CAUTION
The pipe has a special coating
on the threads. Do not remove
this coating; the coating pre-
vents the pipe from unscrew-
ing. Once assembled, do not
remove the pipe.
FLUSH MOUNTING
For Low Ceilings
1. Fit the canopy over the motor
hanger adapter as shown in Fig-
ure 3b. Make sure the canopy fits
Figure 3a - Inserting Pipe through
Canopy
Pipe
Canopy
Pipe
Setscrew
Figure 3b - Placing Canopy and
Washer Over Adapter
Assembly
Washer
Canopy
Adapter
Top of Fan
snugly against the fan assembly
with no space between the pieces.
2. You will find a large assembly
washer included with the fan.
Place the washer over the adapter
and canopy as shown in Figure 3b.
Summary of Contents for Fan
Page 2: ...2 41343 01 7 1 2002 ...
