SpECIFICATIONS .....................................................................................................................................
Power Input: 24 VAC, 50/60Hz (from host controller)
Current draw: 20 ma, max
Non-volatile memory
Replaceable 10-year lithium battery CR2032 (for time/date backup only)
Wiring: ET Module power, SmartPort
ET Sensor wiring, 2 x 20 AWG direct burial, color-coded. If other wire is to be used, recommend 18 AWG/1mm x 2 direct burial.
Max distance, ET Module from controller: 6 ft./2 m
Max distance, ET Sensor from module: 100 ft./30 m max.
ET SySTEm COmpATIBILITy LIST .......................................................................................................
SRC/SRC Plus Controllers
Pro-C Controllers
ICC Controllers
ACC Controllers (with included ACC adapter)*
ACC-99D Controller (with included ACC adapter) up to 48 stations, maximum*
*ET System is technically compatible with ACC controllers, but not necessarily recommended.
dImENSIONS ...........................................................................................................................................
ET Module – 6" H x 4" W x 1.75" D (153 mm H x 102 mm W x 45 mm D)
ET Sensor – 10½" H x 7¼" W x 12
8
" D (26.7 mm H x 18.4 mm W x 30.8 mm D)
ET Sensor with pole brackets – 10½" H x 7¼" W x 13" D (26.7 mm H x 18.4 mm W x 33.0 mm D)
ET Sensor with ET Wind – 11½" H x 7¼" W x 19
f
" D (29.2 mm H x 18.4 mm W x 50.5 mm D)
ET Sensor and ET Wind with pole brackets – 11½" H x 7¼" W x 20¾" D (29.2 mm H x 18.4 mm W x 52.7 mm D) FCC Notice
FCC NOTICE ...............................................................................................................................................
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Hunter Industries Incorporated • The Irrigation Innovators
Internet: www.HunterIndustries.com
P/N 654200 LIT-399 Rev E 7/08
Summary of Contents for ET System
Page 4: ...D 2 A B C E ...
