RESETTING FILTER TIME INDICATOR
Pre-Filter Indicator Light:
Your Hunter
®
air purifier is programmed to remind you to
replace the pre-filter after 3 months, based on continuous use (approximately
2,160 hours). The indicator is only a guide. Depending on air quality and
environmental factors, pre-filter may need to be replaced more regularly. After
pre-filter is replaced, press and hold the pre-filter indicator button for 3
seconds. The unit will beep 3 times to indicate reset.
HEPA Filter Indicator Light:
Your Hunter air purifier is programmed to
USING THE CONTROLS
Power:
Press On/Off to turn air purifier on or off.
Fan Speed:
Press Speed to choose from Low, Medium, High, or Turbo speed.
Timer:
To use timer function, set to desired speed and press Timer button to select
2, 4, or 8 hours of operation. Air purifier will turn off after specified time.
Sleep Mode:
When Sleep Mode is activated by pressing the Sleep Mode button, air
purifier will operate on low speed setting until mode is changed back to Manual.
UV Mode:
UV Mode removes airborne bacteria. When UV Mode is activated by
pressing the UV Mode button, the air purifier accent light will turn on. The accent
light is NOT the UV light, only an indicator that UV Mode is on. UV light is enclosed
in the unit to avoid exposure or harm. Accent light cannot be turned off in UV
Mode.
remind you to replace the HEPA filter after 6 months, based on continuous use
(approximately 4,320 hours). This indicator is only a guide. Depending on air
quality and environmental factors, HEPA filter may need to be replaced more
regularly. After filter is replaced, press and hold the HEPA filter indicator button for
3 seconds. The unit will beep 3 times to indicate reset.
