
How to Get the Camera Ready
1. Insert the Batteries
Open the camera and insert the batteries as polarity marked in battery
compartment.
Note!
12pcs AA Alkaline or Ni-MH are recommended. For better
performance, choose the “Battery Type” of the batteries used.
SETUP
à
MENU
à
Other
à
Battery Type
2. Insert the SD card & SIM card
Insert the SD and SIM card in correct direction according to the mark on
the camera.
Note!
Minimum 4GB and maximum 32GB SD card is required.
3. Mount the Antennas
Screw the antennas into the connectors on the top of the camera by
turning clockwise until properly fastened.
4. Configure Camera Settings
Slide the Power Switch to SETUP, the screen will light up. Press MENU
button, you will enter the menu to view & change settings. Press arrow
buttons for navigation, OK button to confirm settings and MENU to return
to previous position in the menu.
5. How to Connect the Camera to Network
The camera has a signal “Searching” process when you slide the Power
Switch to SETUP. It may take a minute or two to connect on a cellular
network.
Hunter SIM:
When connected the signal strength indicator will be shown on the
screen.
Other brand SIM:
If “SIM Auto Match failed
…
” pop-up on the screen. Go to the Menu,
“Cam”, “4G Setup”, select “Manual” and fill in your SIM operator APN
details. The camera will connect to the network for transmitting photos.