Menu
Slide the “Power Switch” to SETUP position and press “MENU” once to
enter camera setting menu. Navigate the setting interface by pressing
“
◄
”, “
▲
”, “
►
” or “
▼
”, press “OK” for selection or “MENU” to exit to
previous page.
Note!
●
For some settings, user needs to press “MENU” to save & exit the
configuration after pressing “OK” to confirm (Cam ID, Delay, Time Lapse,
Timer, Password).
●
In other settings pressing “MENU” switches alpha/ digits/ symbols.
Cam
Setting
Programmable Options
Cam Mode
Photo
– camera shoots photos only, based on
configured Multi-shot & Image Size.
Video
– camera shoots videoclips only, based on
configured Video Size.
PIC+Video
– camera shoots photo(s) first, then video
upon same trigger event, based on configured Multi-
shot, Image Size and Video Size.
Image Size
24MP
(5632x4224),
12MP
(4032x3024),
8MP
(3264x2448),
stored on the SD Card
Multi-shot
Programmable 1~5 photos per trigger.
Video Size
FHD
(1920x1080) – 10sec.
HD
(1280x720) – 10sec.
WVGA
(848x480) – 10sec.
Night Mode
Min.Blur
– Short exposure time to minimize motion blur
for better image quality; shortened IR flash range.
Max.Range
– Longer exposure time to extend IR flash
range for better night vision; lower image quality.
Balanced
– Combination of above 2 options.
Flash Power
High
– Stronger flash in dark environment. All 57 IR
LEDs will work (consume more battery current).
Low
– Weaker flash in dark environment. Bottom 30 IR
LEDs will be turned off (consume less battery current).
Cam ID
Select “ON”, press “OK” to set 12 digits/ alphabets for