44119-01 • 10/10/2012
©2012 Hunter Fan Company
49
If the fan switch on the bottom of the thermostat is set to Refresh then for every hour
that your system does not run, your system’s fan will come on and run for 15 minutes
to circulate the air in the house, then shut down.
Refresh Fan
To protect your system from cycling, system turning on and off rapidly. When your
system is running in cool mode, and the compressor shuts down, your fan will continue
to run for 15 seconds to force the remaining cold air in your ducts out. (This option
cannot be changed or disabled.)
Cool Runtime
If you have a multi-stage heat pump, the stage timer works in conjunction with your
second stage span to determine when your second stage heat will turn on. If your
primary heat runs for 30 minutes without reaching the set temperature or activating
second stage heat, the stage timer will activate your second stage heat. (This option
cannot be changed or disabled.)
Stage Timer
Additional Features
Summary of Contents for 47905
Page 55: ... 2012 Hunter Fan Company 55 ...
