Section A - Fitting the Coal Effect Ceramic Matrices
N
ATURAL
G
AS
:
The fire-bed is constructed of 3 ceramic matrices, 4 small coals, 10
medium coals and 4 large ‘diamond shaped’ coals.
LPG:
The fire-bed is constructed of 3 ceramic matrices, 10 small coals, 4 medium coals
and 4 large ‘diamond shaped’ coals.
1.
Place the rear ceramic matrix into the fire.
The ceramic should sit on the burner tray
top and be placed so that it touches the back
of the firebox. As shown in Diagram A8.
2.
Place the middle ceramic matrix into the fire
so that the flat surface sits on the burner tray.
Push the middle ceramic back until it rests
against the rear ceramic shown in diagram A9.
Note!
Make sure that the middle ceramic does not
block any of the burner tray slots.
3.
Place the front ceramic matrix into
the fire so that it sits between the middle
ceramic matrix and the 2 front tray
supports (Steel brackets at the front of
the tray) shown in diagram A10.
9
Diagram A8
Diagram A9
Diagram A10
