![Hunter Stoves AVALON 4 Series Instructions For Installation/Operating/Maintenance/Servicing Download Page 21](http://html1.mh-extra.com/html/hunter-stoves/avalon-4-series/avalon-4-series_instructions-for-installation-operating-maintenance-servicing_2186798021.webp)
21
PAIRING THE HANDSET (LCD)
If the handset is in its factory reset condition as above, the display will read 7ESC and r and a number will
show as below.
Picking up and holding the handset will unlock the keypad and the green light will illuminate a solid
green (and the LCD backlight may come on if the room is dark enough).
NOTE: Ensure the small isolation slide switch on the top left of the gas fire control is slid to the
right, (I) position to turn the power on to the valve.
1.
Place the handset near the fire, i.e. within a metre (3 feet). No need to hold the handset at this
time.
2.
Simultaneously press and hold the
–
and + buttons on the gas valve control (not the handset)
until the red light on top left of fire control begins to flash rapidly, (it will take about 5 seconds to
start flashing), then immediately release the
–
and + buttons and quickly pressing just the
POWER button on the gas fire control valve.
Note: Pressing of the power button must be done within 1 second of the red light coming
on. If not done quickly enough, then the above must be repeated until done correctly.
3.
When done correctly you will hear an audible sound from the handset and the display will show
the symbol
1.
” and
the green light on the handset will be flashing. You now have 60 seconds to
accept the pairing.
To do this pick up and hold the handset and hold it as previously described to activate the
unlocking of the keypad and press and hold the “SET” button for a
few seconds.
4.
You will hear a few beeps from the handset and the display will change and enter the set-up
menu and set display function.
IMPORTANT NOTE: Even in case you do not complete all of the setup, the pairing is still stored
once accepted by pressing set the first time. The handset will re-enter setup mode at next unlock
(pick up) or by entering set up mode manually. Do not send pairing request again from the valve!
If this is done, then another factory reset of the handset will be required and reset and new pairing
done again.
Summary of Contents for AVALON 4 Series
Page 5: ...5 STOVE DIMENSIONS AVALON 4 CONSORT 5 HAWK 4 MKII...
Page 13: ...13 TROUBLESHOOTING...
Page 14: ...14...
Page 26: ...26 SERVICE RECORDS...