Hunter Douglas Provenance, Installation Operation Care

Page: 12 / 16

CARE
10
Removing the Shade
■
Open the T-hook on the rotator-side installation bracket.
■
Slide the rotator side of the shade up and away from the
bracket.
■
Gently pull the opposite end of the shade from the clutch
tab on the other bracket.
Removing the Valance
■
While holding the valance board, remove each wing nut
from all the studs.
Cleaning Procedures
The following options are available if your shade needs cleaning.
Dusting
■
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances. You may also use a hair dryer on a cool setting or compressed air set
to a low pressure.
Vacuuming
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Spot-Cleaning
■
Only the following Provenance
®
fabrics can be spot-cleaned:
■
Prepare a solution of warm water and a mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Dab the spot with the dampened cloth until the spot is gone. Do not rub the fabric.
■
Allow the shade to dry in the completely lowered position.
Open the T-Hook
to Remove
the Shade
➤
Adelaide
➤
Janipur
➤
Safari
➤
Aspen
➤
Kathay
➤
Samoa
➤
Brisbane
➤
Kiawah
➤
Shoal Bay
➤
Camden
➤
Mindanao
➤
Thailand
➤
Coastal
➤
Montana
➤
Mono Color Liners
➤
Colfax
➤
Nantucket
™ ➤
Duo Color Liners
➤
Corner Market
➤
Palisade