Hunter Douglas Provenance, Installation Operation Care

Page: 10 / 16

OPERATION
8
Operate the Shade
To Lower the Shade
■
Hold the back of the cord loop and pull down.
■
Pull until the shade is at the desired height.
Important:
If a reverse roll shade was ordered,
the fabric will roll off the front of the shade.
To Raise the Shade
■
Hold the front of the cord loop and pull down.
■
Pull until the shade is at the desired height.
Troubleshooting
Problem
The shade raises or lowers unevenly.
Solution Check that the installation brackets are level and aligned. Shim the brackets, if
necessary.
Problem The shade will not raise.
Solution If the hold-down brackets have been used, make sure they have been released.
Problem The universal cord tensioner has climbed to the top of the shade.
Solution
Pull down on the spring to relieve tension and pull the universal cord tensioner to
the bottom of the cord loop. Properly mount the cord tensioner. See
the Universal
Cord Tensioner Installation Instructions that came with your Cord Tensioner Kit .
Pull the
Back
Cord
to Lower
Pull the
Front
Cord
to Raise