INSTALLATION
5
Mount the Installation Brackets — Outside Mount
■
■
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail on the mounting surface.
■
➤
Alternatively, measure the width of the headrail and use that width to mark the
headrail end points over the window opening.
■
■
Mark 2" from each end of the headrail.
■
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■
■
Center the installation brackets on your marks and mark the location of the screw holes.
■
➤
A minimum mounting surface height of 1
1
⁄
4
" for installation brackets or extension
brackets is required.
■
➤
The top of the installation brackets or extension brackets should be at the desired
height. The brackets should be level and aligned.
■
➤
When using extension brackets, mark two screw holes per bracket.
CAUTION:
The rear of the brackets must be flush against a flat mounting surface. Do
not mount brackets on curved molding.
■
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
Headrail End Marks
Window Opening
2"
Space Evenly
Space Evenly
2"
