Installaction & User Manual
90
6.4.1.3 AGC (Auto Gain Control)
AGC is the function to control the range of video signal input from camera connected.
Configure Enable/Disable using directional key or mouse wheel.
6.4.1.4 Brightness/Contrast
It can control Brightness and Contrast of video. After press [ENTER], use left/right button or
mouse wheel to set the value wanted from each “–9” to “+9”.
6.4.2 Monitor Setup
Main monitor provides all function which DVR supports and with spot monitor can use single
channel conversion.
Covert channel
With Covert menu, user can covert the channel in Live/Playback mode
In Covert menu, all channel list will be shown and press [Enter] button and click mouse to tick
the channel. Checked channel will not show the video in Live/Playback.
User sequence configuration
User sequence can be edited. There are 16 user sequence mode and its interval is from 1 to
60seconds.
Multi mode
The DVR has 3 predefined screen modes. 4E(4channels), 9B(basic 7 channels and additional 2
channels),10A(10 channels).
The way to composing
The way to compose screen is selecting the target and after selecting right window and press
[Enter] button or use mouse. If channel selection is down, press [ESC] button or click mouse
light button.
