<Note>
1) The network cable connected to DVR should be Gigabit Ethernet Cable (Category-6). If not,
it is not connected to DVR.
2.3.7.2 Set ID Configuration
Set ID using Rotary Switch located on the back. This ID is used as IP Address of NVS04R and
the form of IP address is 10.10.20.XXX. when the user connect more than 2 units of NVS04R,
each ID should be set differently.
Set the ID using driver. The value for the first digit of switch should match with values of 100x on
the rare panel while the second digit of switch should match with value of 10x and the third digit
of switch should match with 1x on the rare panel
