Hunt Electronic HLC-8JMD, User Manual

Page: 76 / 82

Factory Default
If you forget your password, please follow the steps to set back the IP Camera
to its default value.
•
Keep the power through while it is already switched on.
•
Use any hard & tiny little stick to reach into the hole where there is a
word “Reset” right under. Press and hold the button within as
demonstrated in the picture below.
•
It will take around 5 seconds to boot the camera.
•
Release the button when the camera finishes booting.
•
Re-login the camera using the default IP ( http://192.168.1.200 ), and user
name: admin , password: admin .