Digital Video Recorder Quick Start Guide
28
2.3 RS-485 and Controller Connection
Typical Connection:
Figure 2-5
Controller Connection A
To connect PTZ to the DVR:
Step 1
Disconnect
pluggable block
from the RS-485 terminal block.
Step 2
Press and hold the orange part of the pluggable block; insert signal cables into slots and
release the orange part. Ensure signal cables are in tight.
Step 3
Connect A+ on PTZ to D+ on terminal block and B- on controller to D- on terminal block.
Fasten stop screws.
Step 4
Connect pluggable block back into terminal block.
Make sure both the controller and DVR are grounded.