Digital Video Recorder Quick Start Guide
13
No.
Name
Function Description
STATUS
Indicator turns blue when the device is
controlled by an IR remote.
Indicator turns red when controlled by a
keyboard and orange when IR remote and
keyboard is used at the same time.
Indicator does not light when the device is
controlled by the IR remote control with the
address of 255.
HDD
HDD indicator blinks in red when data is being
read from or written to HDD.
TX/RX
TX/RX indictor blinks in blue when network
connection is functioning properly.
GUARD
Indicator turns blue when the device is armed;
Indicator does not light when the device is
disarmed;
The arm/disarm state can be initiated by
pressing and holding on the ESC button for
more than 3 seconds in live view mode.
2
Alphanumeric Buttons
Switch to the corresponding channel in Live
view or PTZ Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in Playback
mode.
The light of the button is blue when the
corresponding channel is recording; it is red
when the channel is in network transmission
status; it is pink when the channel is recording
and transmitting.
3
Control
Buttons
DIRECTION
The DIRECTION buttons are used to navigate
between different fields and items in menus.
In the Playback mode, the Up and Down button
is used to speed up and slow down recorded
video. The Left and Right button will select the
next and previous record files.
In Live View mode, these buttons can be used to
cycle through channels.
In PTZ control mode, it can control the
movement of the PTZ camera.
ENTER
The ENTER button is used to confirm selection
in any of the menu modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or
pause the video.
In single-frame Playback mode, pressing the
button will advance the video by a single frame.