Digital Video Recorder Quick Start Guide
16
Figure 1-5
Front Panel 5
Table 1-5
Description of Front Panel 4 and 5
No.
Name
Function Description
1
POWER ON/OFF
Power on/off switch.
2
IR Receiver
Receiver for IR remote
3
Status
Indicators
ALARM
Turns red when a sensor alarm is detected.
READY
Ready LED is normally blue, indicating that the
device is functioning properly.
STATUS
Turns blue when device is controlled by an IR
remote.
Turns red when controlled by a keyboard and
purple when IR remote and keyboard is used at
the same time.
HDD
Flashes red when data is being read from or
written to HDD.
MODEM
Reserved for future usage.
TX/RX
Flashes blue when network connection is
functioning properly.
GUARD
Guard LED turns blue when the device is in
armed status; at this time, an alarm is enabled
when an event is detected.
The LED turns off when the device is unarmed.
The arm/disarm status can be changed by
pressing and holding on the ESC button for
more than 3 seconds in live view mode.
4
DVD-R/W
Slot for DVD-R/W.
5
Control
Buttons
DIRECTION
The DIRECTION buttons are used to navigate
between different fields and items in menus.
In the Playback mode, the Up and Down button
is used to speed up and slow down recorded
video. The Left and Right button will select the
next and previous record files.