28
3.4
RECORD SETUP
A. Pre-Alarm Record Time
/
Post-Alarm Record Time
Pre-alarm record means the recording before alarm is triggered; post-alarm record
means the recording after alarm is triggered. If you set 5 sec for pre-alarm and 5 sec
for post-alarm, the alarm recording length will be total 10 sec.
B. Record Mode
The record mode will be applied to all channels simultaneously. When recording,
NVR record both main streaming and sub streaming from IPCam.
Use the drop down list to switch the recording mode.
1. Manual:
Click
to start recording. Click
to stop recording.
2. Schedule:
a. Schedule Setup:
Click the tag “Full Recording”(Red) / “Alarm Recording”(Yellow) / “No
Recording”(Green), and then draw on the calendar. The recording type will follow
the schedule.
The tag “Alarm Recording” includes all alarm type.
b. Mail Schedule Setup:
Select the time that the recording video is sent to the mail address. No mail will be
sent during “NO MAIL” time period even the motion detection is triggered.
Summary of Contents for HDR-04FE
