Hunt CCTV HTP-T32G28D, User Manual

Page: 24 / 35

HTP-T32G28D User Manual
-23-
PTZ Type
Select the type of PTZ receiver.
PTZ ID
Since it is possible to control multiple receivers over a single control line, each receiver will be
assigned with a unique ID. Enter PTZ ID of a receiver for control. The ID value range can be
between 0 and 255.
PTZ Port
Select the serial port used for PTZ camera control.
Direct Keyboard Control
Keyboard controller can be connected to HTP-T32G28D directly to control zoom and focus.
„ Sensor Type
There is one sensor input port on HTP-T32G28D. The sensor port can be configured to the following.
Function Operation
OFF
Not used
NO (Normally Open)
The port is normally open and activated when
closed.
NC (Normally Closed)
The port is normally closed and activated when
opened.
The function of the sensor port is set based on the type of the sensor connected.
„ Sensor Schedule
If you select sensor on, Each sensor port can be enabled or disabled by day(of a week) and
hour units. Sensor is disabled during the grey-colored duration.