Hunt CCTV HTP-T32G28D, User Manual

Page: 15 / 35

HTP-T32G28D User Manual
-14-
„ System ID
Designate system ID. Designated ID is displayed in Web viewing.
„
Language
Select language accordingly.
„ Firmware Version
Displayed current Firmware Version
„ Board ID
Network board ID of HTP-T32G28D recognized by system
„ Start Time
Latest system boot date and time
„ Current Time
Current date & time: enter a new date and time and press
Set Current Time
button to update date &
time.
„ Time Zone
Select time zone where the system is installed. Depending on the time zone, Daylight-saving time will be
adjusted automatically.
„ Automatic synchronization with NTP
Synchronize system time with an NTP server using NTP (network time protocol).
Name of the NTP server should be registered on NTP server Name.
„ Reboot System
Pressing
Reboot Server
button will cause the system to reboot.
Do not press the Reboot button unless the server needs a reboot .
„ Factory Reset
Current IP Address of HTP-T32G28D is changed to default IP Address, 192.168.10.100.
System log and user registrations are also cleared. The other setting value will be remained.