32
33
Super DNR High Resolution Day/Night Dome Camera
Super DNR High Resolution Day/Night Dome Camera
①
When the SPECIAL menu screen is displayed, press the Up and
Down buttons so that the cursor points to MOTION DET.
②
Set up the function using the 4 directional buttons.
- SENSITIVITY : Select up to eight MD areas. When the SENSITIVITY
value is high, motion detection sensitivity is increased to recognise
small movements.
- AREA MODE : Determines whether to use the MD area selected
in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area
is to be used.
- YPOS : Determines the co-ordinates of the vertical axis for SEL POS.
- XPOS : Determines the co-ordinates of the horizontal axis for SEL POS.
- FILL
→
SET : Fills in a selected MD area. Fills in a selected MD
area. The color of filling is sequentially selected as brown, orange,
blue, cyan, yellowish green, yellow and red.
- RETURN : Select this to save the MOTION DET menu settings
and return to the SPECIAL menu.
●
PRIVACY : Hide an area so that it is not
displayed on the monitor.
①
When the SPECIAL menu screen is
displayed, press the Up and Down buttons
so that the cursor points to 'PRIVACY'.
Note
• MD areas show only on the MOTION DET menu. Therefore, MD
areas are not displayed on the monitor screen.
②
Set up using the 4 directional buttons.
- AREA SEL : Up to 8 areas are selectable.
- AREA MODE :
Determines whether to use the area selected
in the AREA SEL, and the size and position of
the area.
EXIT
Press the SET button in the EXIT menu to save the current settings and exit the
SET menu.
- MASK COLOR : Determine area color. Select Grey, Green, Red, Blue,
Black or White.
- TRANSP : Determine the transparency of the selected area, the range is
from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
●
DIS (Digital Image Stabilizer) :
This function mitigates picture movement caused by external factors, such as wind.
●
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication
status when controlling the camera through an
external device.
①
When the SPECIAL menu screen is displayed,
press the Up and Down buttons so that the
cursor points to 'COMM ADJ'.
②
Set up the mode using the 4 direction buttons.
- CAM ID : Determines the camera's identification number (between 0 and 255).
- BAUD RATE : Select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : Select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller
device when a communication control command is sent to the camera.
- DISP CAM ID : Display the camera title on the top left corner of the screen.
●
LANGUAGE : Select the appropriate menu language.
●
RESET : Resets the camera settings to the factory defaults.
●
RETURN : Select this to save the SPECIAL menu settings and return to the
SPECIAL menu.
■
How to Use the Camera
