Hunt CCTV HTC-T16G28D, Instruction Manual

Page: 16 / 20

30 31
Super DNR High Resolution Day/Night Dome Camera Super DNR High Resolution Day/Night Dome Camera
②
Set to 'ON' using the Left and Right buttons.
③
Press the SET button.
④
Use the 4 directional buttons to move to a character, and select
it by pressing the SET button. Repeat this action to enter multiple
characters. Up to 15 alphanumeric characters can be used.
Note
• If the cursor is moved to CLR and the SET button pressed, all letters
are deleted. To edit a letter, change the cursor to the bottom left arrow
and press the SET button. Move the cursor over the letter to be edited,
move the cursor to the letter to be inserted and then press the SET button.
Note
• When the CAM TITLE menu is
'OFF', no title will be displayed
on the monitor screen even if
one has been entered.
SPECIAL
1. CAM TITLE OFF
2. SYNC INT
3. MOTION DET OFF
4. PRIVACY OFF
5. DIS OFF
6. COMM ADJ
7. LANGUAGE
ENGLISH
8. RESET
9. RETURN
Camera ID
M L K J I H G F E D C B A
Z Y X W V U T S R Q P O N
m l k j i h g f e d c b a
z y x w v u t s r q p o n
9 8 7 6 5 4 3 2 1 . -
D N E S O P R L C
→ ←
⑤
Enter a title, move the cursor to 'POS' and press the SET button. The
entered title appears on the screen. Select the position to display the title
on the screen using the 4 directional buttons and press the SET button.
When the position is determined, select 'END' and press the SET button
to return to the SPECIAL menu.
●
SYNC : In areas where the supply is 60Hz,
multiple cameras using the power
synchronisation function (Line-Lock),
without using a synchronisation signal
generator.
- INT : Internal Synchronisation Type
- L/L : Power Synchronisation Type, Line-lock
• Press the SET button.
• Select a phase between 0 and 359.
●
MOTION DET:
Connecting an alarm device to this camera
enables efficient activity monitoring, because
a signal is generated by the camera whenever
motion is detected.
Note
• When using AC power at a 60Hz frequency Line-Lock synchronisation
can be used.
• When the power is DC 12V, the SYNC. menu is fixed to the 'INT' mode.
■
How to Use the Camera