22
23
Super DNR High Resolution Day/Night Dome Camera
Super DNR High Resolution Day/Night Dome Camera
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
ATW
4. BACKLIGHT
OFF
5. DNR
ON
6. DAY/NIGHT
AUTO
7. IMAGE ADJ
8. SPECIAL
9. EXIT
MAIN SETUP
This camera is designed to deliver a clear and distinct image of both
subject and background, even when the subject is backlit, using a
proprietary SV-IV DSP chip.
1. Position the cursor to point to BACKLIGHT on the SETUP menu screen
using the Up and Down buttons.
2. Select the desired mode using the Left and Right buttons.
Note
• Under the following conditions White Balance may not work properly.
In such cases, select the AWC mode.
①
When the color temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)
②
When the ambient illumination of the subject is low.
③
If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
BLC ON
BLC OFF
●
BLC : Enables a user to directly select a desired area from a picture, and
to view the area more clearly.
●
OFF : Not being used
●
Select 'BLC' to adjust the area to be
enhanced and enhancement level.
●
HLC : Enable a user to select a mask
color of high light area from a picture.
●
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it
possible to view car license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the
screen, remove the high light to see license plates clearly.
HLC OFF
HLC ON
HLC MASKING AREA
3. Select a desired mode using the Left and Right buttons and press the SET button.
■
How to Use the Camera
