GLINT2_
××××××
from your Wi-Fi list. Input the default connection password: 12345678.
3. Start GLINT 2.0 APP, tap
“
connect
”
button to enter into the home page. If you can enter into the home page after connection, it means
that the remote control and mobile device connect successfully. Otherwise it means the failure connection.
Warning
Make sure that the aircraft doesn
’
t unlocked to take off before using GLINT 2.0 APP.
*To avoid signal interference, don
’
t use other 2.4GHz device when flying.
6. Remote Controller Operation Instruction
The default control mode of remote control is
“
American hand
”
. The left stick controls altitude and rotation, while the right stick controls the
forward
、
backward
、
left or right movements. The gimbal dial controls the rotating angle of gimbal.
*
For more flight operation, please refer to
GLINT 2.0 User Manual
. You can customize or change these controls through the GLINT 2.0 APP.
7. Getting Ready for Takeoff
Please install the landing gears, gimbal and camera as the picture shown.
Place the aircraft on a flat surface in an open space, with the nose facing away from you.
